Concrete, vinyl and fibreglass pools removed and the void filled. The choice between partial and full removal changes the price, the paperwork and what you can build on that ground afterwards.
Partial removal breaks the shell, punches the base for drainage and fills the void. It is faster and cheaper, and it is the right answer for most back gardens that are becoming lawn. Full removal takes the whole structure out and backfills to engineered standards, which costs more but leaves ground you can build on and a cleaner answer for the next buyer.
The difference matters because many municipalities require the fill to be disclosed, and some will not permit a structure over a partial fill without geotechnical work. We explain which you are choosing and why before we price it.
A pool holds tens of thousands of litres of chlorinated or salted water, and most municipalities have rules about where it can go. Storm drains are usually prohibited outright because the discharge reaches watercourses untreated. Sanitary connections often need notice and sometimes a permit, and rate limits apply so the system is not overwhelmed.
Dechlorination and pH correction may be required before anything is released at all. It is a small part of the job that causes a disproportionate share of the fines, so we handle it as its own step rather than an afternoon with a pump.
The rest of the sequence then follows the ordinary residential demolition pattern, spoil and shell leave under debris hauling with weigh tickets, and pool houses or cabanas are quoted alongside under garage demolition.
Partial if the ground is becoming lawn or garden. Full if you may build there, or if you want the cleanest answer for a future buyer. The price difference is real but so is the restriction.
In most places yes, on sale. That is one reason full removal appeals to owners planning to move, even though it costs more up front.
Wherever your municipality permits, which is rarely the storm drain. Dechlorination and rate limits usually apply, and we handle it as a formal step.
A partial fill-in on a standard in-ground pool is two to three days. Full removal with engineered backfill runs longer, mostly because of the compaction testing.
Usually, though access decides the machine size and therefore the days. Where nothing fits, hand work and conveyors are possible and priced accordingly.
Customer reviews
What Hartford owners say about their demolition contractor
